Probes, Reamers, Vices, Drills, Punches, Scribes at The Model Catalogue

STORE SECTIONS

OUR GUARANTEE:

Any purchase gives you a 3 YEAR money-back guarantee. All you have to do to invoke it is present the relevant invoice to us and return the items in their original condition.

Probes, Reamers, Vices, Drills, Punches, Scribes

Online Catalogue > Modelling Accessories > Modelling Tools > Probes, Reamers, Vices, Drills, Punches, Scribes

CKTools Keyless Hex Chuck (1/4 Inch / 6 mm) [cktT2463 (T2463)] Converts 1/4 inch (6 mm) hexagon drive, powered screwdrivers into a drill. Accepts the smallest drill diameters and up to 6 mm if required. This product was introduced to provide a superb alternative solution for drilling in plastic using a manual drilling device such as a drill stock. Spend a few pounds extra on this hex chuck and a powered screwdriver (if you don't already have one) and a drill from your Micro Box drill set to create holes in your modelling project very quickly and with a lot … [To read on please click the link below or the product image.] Click here for a larger image and more info... Email a friend about this product ... Price: £7.47 (Including: VAT at 17.5%) Stock Level: 8		Quantity:

Modelcraft Tapered Reamer 3-16mm [mpdr0074 (pdr0074)] This hand operated tapered reamer is used to finish and deburr panel holes of between 3mm and 16mm in diameter. Made with heavy duty stainless steel it should provide years use. Click here for a larger image… Email a friend about this product ... Price: £7.99 (Including: VAT at 17.5%) Stock Level: 1		Quantity:

Modelcraft Scriber with Tungsten Carbide Point [mpsb0800 (psb0800)] This scriber includes a fully retractable and replaceable tungsten carbide point together with a unique device to stop point from falling out. Used to emphasise panel lines or to mark out super thin lines in plastic for subsequent cutting. Why? A pencil or pen line might not be accurate enough in small scale applications. THIS ITEM IS NOT IN STOCK. ORDERING HAS BEEN TEMPORARILY DISABLED FOR THIS ITEM. Click here for a larger image and more info... Email a friend about this product ... Price: £5.99 (Including: VAT at 17.5%) Stock Level: 0

Modelcraft Superfine Scriber with Tungsten Carbide Point [mpsb0930 (psb0930)] This superfine scriber boasts a fully retractable and replaceable tungsten carbide point and a device to stop point falling out. Used to emphasise panel lines or to mark out super thin lines in plastic for subsequent cutting. Why? A pencil or pen line might not be accurate enough in small scale applications. Click here for a larger image and more info... Email a friend about this product ... Price: £7.99 (Including: VAT at 17.5%) Stock Level: 3		Quantity:

Modelcraft English Pattern Vice 121 Type (Capacity 0.0 - 1.0 mm) [mppv4002 (ppv4001/a)] Hollow shaft with knurled body for holding long items. Click here for a larger image… Email a friend about this product ... Price: £2.98 (Including: VAT at 17.5%) Stock Level: 1		Quantity:

Modelcraft English Pattern Vice 122 Type (Capacity 0.8 - 1.5 mm) [mppv4003 (ppv4001/b)] Hollow shaft with knurled body for holding long items. Click here for a larger image… Email a friend about this product ... Price: £2.98 (Including: VAT at 17.5%) Stock Level: 2		Quantity:

Modelcraft English Pattern Vice 123 Type (Capacity 1.3 - 3.1 mm) [mppv4004 (ppv4001/c)] Hollow shaft with knurled body for holding long items. Click here for a larger image… Email a friend about this product ... Price: £2.98 (Including: VAT at 17.5%) Stock Level: 2		Quantity:

Modelcraft English Pattern Vice 124 Type (Capacity 3.0 - 4.8 mm) [mppv4005 (ppv4001/d)] Hollow shaft with knurled body for holding long items. Click here for a larger image… Email a friend about this product ... Price: £2.98 (Including: VAT at 17.5%) Stock Level: 2		Quantity:

Modelcraft Adapter Pin Chuck Set with 4 Collets [mppv5155 (ppv5155)] For use with miniature drills. Lock this adapter in a chuck to convert it for precise drilling with small drill sizes. THIS ITEM IS NOT IN STOCK. ORDERING HAS BEEN TEMPORARILY DISABLED FOR THIS ITEM. Click here for a larger image… Email a friend about this product ... Price: £3.99 (Including: VAT at 17.5%) Stock Level: 0

Modelcraft Archimedian Drill Stock with Spring Return [mpdr1126 (pdr1126)] A collection of miniature drills (which are also available from The Model Catalogue) is an essential part of any modellers toolbox. This spring return archimedian drill is the perfect compliment as it is ideal for all small drill bits up to 1mm in size. To drill accurately and without the need to spend money on a power drill it provides great value. Simply slot a drill bit into the loosened vice, tighten, place the end of the drill bit in the required location, and drill by oscillating the colla… [To read on please click the link below or the product image.] THIS ITEM IS NOT IN STOCK. ORDERING HAS BEEN TEMPORARILY DISABLED FOR THIS ITEM. Click here for a larger image and more info... Email a friend about this product ... Price: £5.99 (Including: VAT at 17.5%) Stock Level: 0

Modelcraft Archimedian Drill Stock [mpdr1411 (pdr1411)] A selection of miniature drills (also available) is an essential part of any modellers tool box and if you would rather do without the spring return drill stock, this archimedian drill stock is the next best thing being ideal for all small drill bits up to 1mm. It is a great way to drill accurately without the need to spend money on a power drill. Simply slot the drill bit into the vice, tighten, place the end of the drill bit in the place required, then drill by twisting in your fingers while a… [To read on please click the link below or the product image.] THIS ITEM IS NOT IN STOCK. ORDERING HAS BEEN TEMPORARILY DISABLED FOR THIS ITEM. Click here for a larger image and more info... Email a friend about this product ... Price: £4.99 (Including: VAT at 17.5%) Stock Level: 0

Modelcraft Set of 6 Probes [mpdt5197 (pdt5197)] Probes are a familiar tool of a dentist's surgery however, like many instruments that have originated in the medical profession, they have found a permanent place on many a modeller's workbench. With their sharp pointed ends they are especially useful for marking drilling points in plastic (so that the drill bit doesn't slip), manoeuvring small parts in confined spaces, placing dots of superglue with great accuracy, cleaning intricate parts (such as radial engines) of flash in confined places an… [To read on please click the link below or the product image.] Click here for a larger image and more info... Email a friend about this product ... Price: £7.99 (Including: VAT at 17.5%) Stock Level: 2		Quantity:

Modelcraft Set of 3 Probes [mpdt5198 (pdt5197/3)] Probes are a familiar tool of a dentist's surgery however, like many instruments that have originated in the medical profession, they have found a permanent place on many a modeller's workbench. With their sharp pointed ends they are especially useful for marking drilling points in plastic (so that the drill bit doesn't slip), manoeuvring small parts in confined spaces, placing dots of superglue with great accuracy, cleaning intricate parts (such as radial engines) of flash in confined places an… [To read on please click the link below or the product image.] Click here for a larger image and more info... Email a friend about this product ... Price: £4.99 (Including: VAT at 17.5%) Stock Level: 5		Quantity:

Modelcraft Double-Ended Pin Vice [mppv1061 (ppv1061)] Handy holder for drills, taps, pins etc. 2 reversible collets: (0-1.2mm, 1.3-2.4mm & 0.8-2.0mm, 1.8-2.9mm). Anti-roll 6-sided body. THIS ITEM IS NOT IN STOCK. ORDERING HAS BEEN TEMPORARILY DISABLED FOR THIS ITEM. Click here for a larger image… Email a friend about this product ... Price: £2.98 (Including: VAT at 17.5%) Stock Level: 0

Modelcraft Double-Ended Pin Vice (Swivel Top) [mppv2237 (ppv2237)] Handy holder for drills, taps, pins etc. 2 reversible collets: (0-1.2mm, 1.3-2.4mm & 0.8-2.0mm, 1.8-2.9mm). Swivel head for comfort and efficiency of use. Click here for a larger image… Email a friend about this product ... Price: £4.99 (Including: VAT at 17.5%) Stock Level: 1		Quantity:

Modelcraft Set of 4 Pin Vices [mppv4001 (ppv4001/s)] Ideal vices for holding small tools, drills, taps etc. Hollow for holding long items. Capacity: (0-1.0mm, 0.8-1.5mm 1.3-3.1mm, 3.0-4.8mm). THIS ITEM IS NOT IN STOCK. ORDERING HAS BEEN TEMPORARILY DISABLED FOR THIS ITEM. Click here for a larger image… Email a friend about this product ... Price: £7.99 (Including: VAT at 17.5%) Stock Level: 0

Modelcraft Punch N Scribe Auto Centre Punch [mpsb0206 (psb0206/g)] This two in one tool can be used as both a slim auto centre punch and scriber. Adjustable tension on centre punch and pocket clip included. Click here for a larger image… Email a friend about this product ... Price: £13.00 (Including: VAT at 17.5%) Stock Level: 2		Quantity:

Modelcraft Handy Scriber 175mm [mpsb1412 (psb1412)] For marking & scoring wood, metal, laminates and plastic. Double ended point for scribing & wedge knife for scraping. The sharp end is used to emphasise panel lines or to mark out super thin lines in plastic for subsequent cutting. Why? A pencil or pen line might not be accurate enough in small scale applications. THIS ITEM IS NOT IN STOCK. ORDERING HAS BEEN TEMPORARILY DISABLED FOR THIS ITEM. Click here for a larger image and more info... Email a friend about this product ... Price: £2.98 (Including: VAT at 17.5%) Stock Level: 0

Modelcraft 20 Piece Micro Box Metric Drill Set 0.3mm - 1.6mm [msdr4001 (dr4001)] This 20 piece set contains only the best quality HSS ground drills (not to be confused with similar looking sets containing cheaper inferior drills. Metric Sizes 0.3 to 1.6mm. Click here for a larger image… Email a friend about this product ... Price: £7.95 (Including: VAT at 17.5%) Stock Level: 8		Quantity:

Online Catalogue > Modelling Accessories > Modelling Tools > Probes, Reamers, Vices, Drills, Punches, Scribes

CART DETAILS

OUR PROMISE:

We deliver trust, reliability, prompt help, great product detail, efficiency in addition to a great selection of models and all the accessories you should need to build a your own modelling masterpiece.